Call: 909 399 612

Welcome to StuffNo1!


Upgrade EFlite Blade 350 QX / QX2 / QX3 - Small Part CNC 350 QX Prop Adapter Set

Be the first to review this product

Included: 4 - E-Flite Blade 350 QX / QX2 / QX3 Prop Adapters (2 right hand thread / 2 left hand thread)
16 - M2.5 x 4mm socket head screws
2 - M6 right hand thread hex nuts, 2 - M6 left hand thread hex nuts, 4 - M6 Flat Washers

Weight (single prop adapter only): 3.1g


Shaft Diameter: 6mm
Shaft Thread: M6x1.0 (2 right hand thread and 2 left hand thread)
Shaft Length: 15.2mm
Base Thickness: 5.5mm

Availability: In stock

Regular Price: $23.95

Special Price $22.75

  • Description


    Upgrades for E-Flite Blade 350 QX / QX2 / QX3 - 350 QX Prop Adapter Set

    (Motor and APC Prop are not included, for illustration only)

    Each of our E-Flite Blade 350QX propeller adapters are CNC machined from billet aluminum.  These adapters will bolt on to the stock BLH7802 motors allowing for a large variety of aftermarket propellers to be used.  They have a 6mm propeller shaft which can be used with the traditional style quadcopter propeller sets.

    The adapters are very strong and light.  This design keeps the propeller very close to the motor to maintain stock flying characteristics.  Replacing the stock propellers with a good quality aftermarket propeller will give you the confidence needed for worry free flying. 

    This set includes 2 right hand thread adapters and 2 left hand thread adapters.  Each propeller will be self tightening while the motor is powered.

    Installation is quick and simple.  No modifications necessary.

    Two step installation:

    1. Install prop adapter onto stock BLH7802 motor using the supplied M2.5 x 4mm socket head screws.
      (each bag will be labeled indicating which motor the adapters should be installed on)
      (see diagram below for more detailed info on prop adapter placement)

    2. Install propeller onto adapter followed by the M6 washer and tighten with the M6 Hex Nut.
      (Or you can use our  350 QX Spinner / Prop Nut Set on our Ebay Store)


    Included:  4 - E-Flite Blade 350QX Prop Adapters (2 right hand thread / 2 left hand thread)
                  16 - M2.5 x 4mm socket head screws
                  2 - M6 right hand thread hex nuts, 2 - M6 left hand thread hex nuts, 4 - M6 Flat Washers

    Weight (single prop adapter only):  3.1g


    • Shaft Diameter:  6mm
    • Shaft Thread:  M6x1.0  (2 right hand thread and 2 left hand thread)
    • Shaft Length:  15.2mm
    • Base Thickness:  5.5mm

    Recommended Plastic Prop Sets:

    • APC 8x3.8 Slow Flyer -  2 x LP08038SF (standard) / 2 x LP08038SFP (pusher)
    • APC 8x4.7 Slow Flyer -  2 x LP08047SF (standard) / 2 x LP08047SFP (pusher)
    • APC 8x4.5 Multi Rotor -  2x LP08045MR (standard) / 2x LP08045MRP (pusher) / 1 x Ring Adapter Kit LPAR06E
    • Similar props will also work such as the Graupner 8x5 etc...

    Must use the 6mm I.D. bushing (ring) to fit properly onto adapters.  These will be a snug fit so a little pressure may be needed to slip prop onto shaft 



    When replacing props it is recommended to check the current (amp) draw with a watt meter so the motor or ESC amperage rating is not exceeded.

    Using aftermarket props with the same diameter and pitch of the original props is recommended if a watt meter is not available.

    Adapter screws should be checked and tightened as necessary.  A drop of blue (removable) loctite can be applied to the 16 screws before installing the adapter.


    Additional Info

    Additional Info

    Manufacturer SmallPartsCNC


    Write Your Own Review

    Only registered users can write reviews. Please, log in or register



    Use spaces to separate tags. Use single quotes (') for phrases.

    Custom Tab 1

    Custom CMS block displayed as a tab. You can use it to display info about returns and refunds, latest promotions etc. You can put your own content here: text, HTML, images - whatever you like. There are many similar blocks accross the store. All CMS blocks are editable from the admin panel.

    Magento Community Edition is the most powerful open source e-commerce software and can be downloaded 100% for free. Developers can modify the core code, add custom features and functionality by installing extensions from Magento Connect marketplace.

    Manage the fully dynamic catalog with the intutive admistrative interface. The flexible catalog system includes various options for the display of items. Magento is also integrated with a variety of major payment gateways out of the box.

    Magento is a fully global platform, allowing for the expansion of business or simply offering multiple versions of your site to meet the needs of your customers. Translated into over 60 languages, supporting multiple currencies, payment methods and taxes, Magento allows for internationalization of your online stores.

    Custom CMS block displayed when you want to replace up-sell products with custom content. You can display here some text, images or any other content.