Call: 909 399 612

Welcome to StuffNo1!

Others

1 Item(s)

per page

  • Upgrade for RC Logger RC Eye One Xtreme Quadcopter Aluminum Motor Mount Set

    Installation: Install original motor into motor mount. Run wires through motor mount tube and secure motor with 2 supplies screws Slip motor mount into frame tube and secure with 2 supplied screws A small drop of blue loctite can be used on screw threads Included: 4 - RC Eye One Xtreme Aluminum Motor Mounts, 16 - M2x4mm long screws Weight (single mount): 2.5g Notes: When installing the motor into the mount, tighten the 2 sets screws so the motor does not spin or pull out. Not a lot of pressure will be needed for this. Do not over tighten screws. Adding a drop of loctite to the threads will ensure the screws will stay in place. When installing the 2 screws to secure the mount to the frame, you will need to apply a little pressure to get the screws started into the frame. Once started, make sure they are straight and then tighten into the threaded hole of the aluminum mount. When used with the PFG frame, you can cut off the tube section with a hack saw if desired. Always check mounting screws before each flight to ensure nothing has come loose from vibrations. Learn More
    $19.95

    Out of stock

1 Item(s)

per page